Double scale multifunctional paint filling machine

System introduction

Dcs-50-ctgy paint filling machine, which adopts the filling method of barrel surface liquid, is widely used in the filling of paint, ink and other non foam liquid materials. Based on years of rich experience, the unique filling valve design is easy to disassemble, change size and clean. The filling head is made of 304 stainless steel + Teflon, which makes the filling head resistant to high temperature, corrosion and dripping. The operator only needs to simply place the bucket mouth on the top of the scale and align it with the lower part of the filling head outlet, pull the [operation switch] on the control box to [automatic], and the system will automatically start the filling. First, use the rapid filling method, and at the end stage, use the secondary filling method of slow filling, so as to quickly and accurately fill the materials into the bucket. After filling, the filling head will automatically close the valve, manually place the cap, and the conveyor belt will automatically transport and complete the capping, After filling, when filling the second barrel, the operator places the empty barrel directly below the filling head, and the system will automatically start filling when his hand leaves the barrel without touching the switch again.

Function introduction
■ put the empty barrel on the scale manually, and the machine will automatically measure and fill with two ends, automatically transport, and automatically position the gland. Suitable for plastic bucket and iron bucket gland.
■ digital input free setting target value (filling weight)
■ you can freely choose two filling methods: net weight and gross weight
■ the filling head is independently designed and developed by our company, which has the functions of rapid disassembly and assembly by hand, size change, easy cleaning and anti dripping
■ the height of the filling head can be adjusted manually, which is suitable for cans of various specifications

■ the independently developed control system adopts high-end hardware, with fast response, simple operation and reliable performance
■ the system has the function of automatically correcting the adjustment error and can be opened / closed freely
■ the two-stage adjustable filling method is adopted to complete the filling quickly and accurately, ensuring the efficiency to the greatest extent
■ automatically identify the tare weight range of empty barrels and the function of no filling without barrels
■ the sealing, soft connection and parts in direct contact with materials are made of 304 stainless steel + Teflon
■ the controller is equipped with manual buttons for all actions, as well as emergency stop, manual feeding and other buttons for special situations
■ the whole machine adopts stainless steel structure, the temporary storage hopper and other parts in direct contact with materials adopt 304 stainless steel, and a small amount of stress parts such as gland, controller and lifting system adopt carbon steel
■ the controller display can display the weighing value, time and date, cumulative filling barrels, cumulative total filling weight and other information in time

■ the whole system is made of explosion-proof standard, and the explosion-proof grade is exdiaiibt4
■ during continuous filling, the system will automatically start filling without pressing other switches again

Basic parameters
■ maximum weighing capacity: 50kg
■ minimum sensitivity: 0.001kg
■ filling error: ± 10g
■ filling speed: 15 barrels / minute (depending on the feed flow rate)
■ control mode: two gear control
■ filling method: on the barrel mouth, fixed
■ hopper liquid level: automatic control of liquid level
■ scale platform size: 680 × 330mm

■ heavy barrel raceway: 680 × 900mm
■ filling valve head: SUS304 stainless steel and Teflon
■ temporary storage hopper: SUS304 stainless steel
■ structural material: SUS201 stainless steel (stressed column carbon steel)
■ roller material: SUS201 stainless steel
■ material interface: Dn40 clamp type quick release interface
■ air source interface: 10mm air pipe interface
■ power supply: users provide 220v/50hz wires to the side of the machine
■ air source: 04mpa-0.8mpa 10mm air pipe (provided by the user to the side of the machine)
■ service temperature: -10 ℃ - 50 ℃
■ foundation conditions: horizontal solid concrete ground, with concrete thickness of not less than 10cm