Ink filling machine

System introduction
Dcs-50-ctjgl double-layer filtering ink filling machine adopts the filling method of barrel surface liquid. Based on years of rich experience, the unique filling valve design is easy to disassemble, change size and clean. The filling head is made of 304 stainless steel + Teflon, which makes the filling head resistant to high temperature, corrosion and dripping. The operator simply put the barrel mouth on the top of the scale and align it with the lower part of the filling head outlet, pull the [operation switch] on the control box to [automatic], and the system will automatically start the filling. First, use the rapid filling method, and at the end stage, use the secondary filling method of slow filling, so as to quickly and accurately fill the materials into the barrel. After the filling is completed, the filling head will automatically close the valve, and the operator will gently push the heavy barrel to the conveying line, and manually put the lid, The machine automatically cappes to complete the filling. When filling the second barrel, the operator places the empty barrel directly below the filling head, and the system will automatically start the filling when his hand leaves the barrel without touching the switch again.

Function introduction
■ digital input free setting target value (Chinese display)
■ you can freely choose two filling methods: net weight and gross weight
■ the height of the filling head can be adjusted manually, which is suitable for cans of various specifications
■ the independently developed control system adopts high-end hardware, with fast response, simple operation and reliable performance
■ the system has the function of automatically correcting the adjustment error and can be opened / closed freely
■ automatically identify the tare weight range of empty barrels and the function of no filling without barrels
■ the sealing, soft connection and parts in direct contact with materials are made of 304 stainless steel + Teflon
■ the controller is equipped with manual buttons for all actions, as well as emergency stop, manual feeding and other buttons for special situations
■ the controller display can display the weighing value, time and date, cumulative filling barrels, cumulative total filling weight and other information in time
■ during continuous filling, the system will automatically start filling without pressing other switches again
Basic parameters
■ maximum weighing capacity: 30kg
■ minimum sensitivity: 0.001kg
■ filling error: ± 5g
■ filling speed: 10 barrels / minute (depending on the feed flow rate)
■ hopper liquid level: automatic control of liquid level
■ air source interface: 10mm air pipe interface
■ power supply: users provide 380v/50hz wires to the side of the machine
■ air source: 04mpa-0.8mpa 10mm air pipe (provided by the user to the side of the machine)
■ service temperature: -10 ℃ - 50 ℃
■ foundation conditions: horizontal solid concrete ground, with concrete thickness of not less than 10cm